High-temperature Mössbauer Spectrometer

High- temperature sample volume investigation

General information

Usage

  • Transmission geometry, the gamma radiation is going through the sample, the detector on the other side is collecting absorption spectrum
  • System equipped with high temperature furnace, the sample is put inside of the furnace
  • Allows to stude the sample under various temperatures and atmospheres

Sample types

  • Powder
  • Thin bulk samples (must be transparent for 14.4 keV gamma photon radiation)

Technical Specifications

Velocity Drive

  • Neodymium magnets based electrodynamic linear motor
  • Drive coil & sensor coil
  • Fast analogue PID velocity controller built-in
  • Velocity generator built-in (up to 50 mm/s)
  • M4 mounting screw for source
  • Internal lead shielding
  • Nickel plated brass aperture collimator (hole diameters: 4mm, 6mm, 8mm, 10mm, 14mm)
  • Standard USB interface
  • PC control application
  • Power requirements: +5V/250mA, +15V/100mA, -5V/20mA, -15V/100m

Transmission Detector

  • YAP:Ce scintillation detector (1“ photomultiplier)
  • High Voltage supply built-in (electronically adjustable)
  • Pre-amplifier & amplifier built-in (electronically adjustable)
  • Single channel analyser built-in (electronically adjustable)
  • Detection range 10keV % 30keV
  • Spectrum registration built-in (1024 channels per unfolded spectrum)
  • Nickel plated brass aperture collimator (hole diameters: 4mm, 6mm, 8mm, 10mm, 14mm)
  • Standard USB interface
  • PC control application
  • Power requirements: +5V/500mA, +15V/20mA, -5V/20mA

High-temperature furnace

  • Different types of furnaces available:
    • Temperature range up to 1000°C
    • Temperature range up to 1400°C
    • Gas flow furnace (not vacuum sealed)
    • Vacuum sealed furnace
  • Temperature control (electronically adjustable)
  • Furnace power supply included

Power supply

  • Standard commerical laboratory power supply
  • Typically 4-channel GW Intek GPE-4323 (110V/240V)
  • Supply voltages: +5V, +15V, -5V, -15V

Experimental setup

  • Standard optical rail and carriages

Calibration set

  • MRA.2.6 standard alpha iron reference absorber (ritverc.com)
  • Dual-channel oscilloscope (USB)

Control PC

  • All-in-one Personal Computer with keyboard and mouse
    (23.8″ Full HD, 8GB RAM, 256 SSD, multi-core processor)
  • Windows 11 operating system
  • Remote access
  • Interface for controlling the spectrometer (Spectrometer is independent on PC)

General notes

  • Turn-key solution, all necessary parts and tools included
  • All standard safety standards met
  • Internal lead shielding
  • Working with both 110V and 240V power grid
  • Most of the parameters are customizable
  • A radioactive source is necessary for Mössbauer Spectrometer operation (a delivery of the source is possible on customer’s request)

Do you have any questions?

Please feel free to contact us.